Built for every trade
Telecommunications takeoff software for pits, conduit and data cabling
A telecommunications (low voltage and data cabling in the US) takeoff runs from the pit at the boundary to the last outlet: pits, lead-in conduit, cable and fibre, data, phone and TV points, access points and the comms cabinet. TrueScale™ counts the points and measures the runs on the same PDF, each sheet at its own scale.
Start free trial 30 days, every feature, no card
What telecommunications installers measure, and why
- Pits and the NBN lead-in conduit from the site services plan. The pit and the pipe are separate prices, and the work in the ground is often quoted by a different crew from the work inside.
- Cable and fibre as runs along the route you click. Cable is bought by the metre, and the route on the plan is the starting point for every allowance you add for drops and loops.
- Data, phone and TV outlets as counts, because every one is terminated, tested and labelled. Wireless access points and patch panels are counts too.
- Cable tray and the comms cabinet, because they are the backbone everything else hangs off.
The Telecommunications tool set
12 tools, from Tool Shed > Trade sets... > Telecommunications:
| Tool | Measures | Starter spec |
|---|---|---|
| Comms pits | count | Comms pit, size to suit |
| Conduit run | length | Comms conduit |
| Cable run | length | Data cable |
| Fibre run | length | Fibre cable |
| Data points | count | Data outlet |
| TV points | count | TV outlet |
| Wireless access points | count | Ceiling access point |
| Comms cabinet | count | Comms cabinet |
| Phone points | count | Phone outlet |
| Patch panels | count | 24 port patch panel |
| Cable tray run | length | Cable tray 150 wide |
| Outlets per room | count | Outlets in one room |
Worked example
Worked example: Kestrel Lane Townhouses
Sheet A0.04, the site setout and services plan at 1:100, for the pits and lead-in conduit; EL.01 and EL.02, the electrical and lighting plans at 1:50, for the data points.
| Measured | Sheet | Quantity |
|---|---|---|
| Comms pits at the street boundary | A0.04 | 3 |
| Lead-in conduit, pit to building | A0.04 | 24.00 m |
| Data points, ground floor | EL.01 | 6 |
| Data points, first floor | EL.02 | 12 |
Per townhouse: one pit, 8.00 m of NBN lead-in conduit and six data points. The services legend marks the NBN lead-in conduit P100.
On the same kind of sheet, Larkspur Rise, the larger house with a detached studio, has 2 comms pits and 18.90 m of lead-in conduit.
A fictional demo project, drawn to scale and measured in TrueScale.
Start free trial 30 days, every feature, no card
Common telecommunications takeoff mistakes
- Pricing cable at the plan length. The plan shows the route across the floor. The cable also rises and drops in walls, runs through the ceiling and is left with a service loop at each end.
- Counting outlets, not cables. A double data outlet is one plate but two cables, two terminations and two tests. Count what you terminate, and use Outlets per room where a room schedule is easier to work from.
- Missing the lead-in. The pit and conduit from the boundary are on the site services plan, not the electrical plans, so a floor by floor count leaves them out.
- Tracing the wrong line. On the Kestrel Lane services plan the comms conduit runs right beside the electrical consumer mains. Read the legend before you trace.
Standards and the NCC
In Australia, customer cabling is installed by a registered cabler to the ACMA cabling rules, AS/CA S009, and pits and pipe in new developments follow the network carrier's own specifications.
Telecommunications takeoff questions
Can I count data points and measure cable on the same plan?
Yes. Data points, TV points and Phone points are count tools with their own symbols, and Cable run, Fibre run and Conduit run measure along the route you click. Both totals come from the same marked up sheet.
How do I keep conduit, cable and fibre apart?
Each is its own tool in the Telecommunications set, so each has its own subject, colour and total in the Markups List.
Can I take off the site plan and the floor plans together?
Yes. Every sheet keeps its own scale, so a 1:100 services plan and 1:50 floor plans in one set each measure correctly.
Can I count outlets room by room?
Yes. Outlets per room is a count tool for working from a room schedule, and Wireless access points, Patch panels and the Comms cabinet are counts in the same set.
Pay once. Own it
One licence has every feature, the Estimate panel and Excel links included. Pay once, own your licence, and take off on TrueScale for Mac too.
Mac: Apple silicon (M1 or newer), macOS 14 or later. Printing, OCR, email, spell check and Link for Excel aren't on Mac yet. What's different on Mac