Built for every trade
Civil takeoff software for drainage, sewer and site works
Civil and site works (sitework in the US) takeoffs start on the site plan: the area to clear and dig, pavements and kerbs, and the stormwater and sewer pipe and pits under the ground. TrueScale™ measures each on the site and services plans at their own scale.
Start free trial 30 days, every feature, no card
What civil contractors measure, and why
- Site clearing, pavement and footpaths as areas, because they are priced by the square metre.
- Excavation and fill as volumes, from the area and the depth, because earthworks are priced by the cubic metre.
- Stormwater and sewer pipe as runs, by size, and trenches as their own lengths, because pipe and trench are priced separately.
- Pits and bollards as counts, and kerbs, line marking and retaining walls as lengths.
The Site and civil tool set
13 tools, from Tool Shed > Trade sets... > Site and civil:
| Tool | Measures | Starter spec |
|---|---|---|
| Site clearing | area | Strip topsoil 150 mm |
| Excavation | volume (area x depth) | Bulk excavation, machine |
| Kerb length | length | Barrier kerb |
| Stormwater pits | count | 600 x 600 pit |
| Bollards | count | Steel bollard |
| Fill volume | volume (area x depth) | Imported fill, compacted |
| Trench length | length | Trench 450 wide, 600 deep |
| Stormwater pipe run | length | Stormwater pipe 150 dia |
| Sewer pipe run | length | Sewer pipe 100 dia |
| Pavement area | area | Asphalt pavement 40 mm |
| Footpath area | area | Concrete footpath 100 mm |
| Line marking length | length | Line marking 100 wide |
| Retaining wall length | wall area (run x height) | Retaining wall |
Worked example
Worked example: Kestrel Lane Townhouses
Sheet A0.03, the site and context plan, and A0.04, the site setout and services plan, both at 1:100.
| Measured | Sheet | Quantity |
|---|---|---|
| Site area | A0.03 | 1,104.93 m² |
| Site boundary | A0.03 | 134.31 m |
| Common driveway, exposed aggregate | A0.03 | 192.72 m² |
| Stormwater pipe DN90 to the legal point of discharge | A0.04 | 22.50 m |
| Stormwater pits | A0.04 | 3 |
| Sewer branches DN100 | A0.04 | 33.60 m |
| Sewer main DN150 in the rear easement | A0.04 | 29.80 m |
The site area matches the 1,104.9 m² on the cover sheet's project data, which is a quick check that the sheet's scale is right before anything gets priced.
A fictional demo project, drawn to scale and measured in TrueScale.
Start free trial 30 days, every feature, no card
Common site and civil takeoff mistakes
- Measuring pipe, pricing trench. Where services share a trench, one trench carries several pipes. Measure the trench with Trench length and each pipe with its own run.
- Forgetting depth. Excavation and fill are volumes, and a site plan only gives the area. Take the depth from the levels or sections and type it on the volume tool.
- Leaving out bulking. Dug soil takes up more room than it did in the ground. Allow for it in the rate.
- Missing the main. On Kestrel Lane the sewer main runs along a 2.0 m easement at the rear. It is easy to price the branches to each townhouse and forget the main they join.
Site and civil takeoff questions
Can I measure an excavation volume from a site plan?
Yes. Trace the area with Excavation and type the depth. TrueScale shows the area and the volume, and the volume follows if you change the depth.
Can I measure pipe by diameter?
Yes. Stormwater pipe run and Sewer pipe run are separate tools. Make a copy of a tool for each diameter, such as DN90, DN100 and DN150, and each size gets its own total.
Does it work on site plans at 1:200 or 1:500?
Yes. Set the scale for the sheet once and every measurement on it uses that scale. Each sheet keeps its own.
Pay once. Own it
One licence has every feature, the Estimate panel and Excel links included. Pay once, own your licence, and take off on TrueScale for Mac too.
Mac: Apple silicon (M1 or newer), macOS 14 or later. Printing, OCR, email, spell check and Link for Excel aren't on Mac yet. What's different on Mac