Built for every trade

Landscape takeoff software: soft areas, walls and trees

Landscape takeoffs come off the site and landscape plans: turf, garden beds and paving as areas, edging, fencing, retaining walls and irrigation as lengths, mulch as a volume, and every tree, shrub and sprinkler counted.

Start free trial 30 days, every feature, no card

What landscapers measure, and why

  • Soft and hard areas apart, because turf, beds and paving are priced per square metre at very different rates.
  • Retaining walls as wall runs with a height, because the face area sets the materials.
  • Mulch as a volume from the bed area and its depth.
  • Trees, shrubs and sprinklers as counts; edging, fencing and irrigation as lengths.

The Landscaping tool set

11 tools, from Tool Shed > Trade sets... > Landscaping:

ToolMeasuresStarter spec
TurfareaRoll-on turf
Garden bedsareaMulched bed
Edging lengthlengthSteel edging
TreescountAdvanced tree
Paving areaareaConcrete pavers on sand
Mulch volumevolume (area x depth)Mulch 75 mm
Retaining wall lengthwall area (run x height)Sleeper retaining wall
Irrigation runlengthIrrigation pipe 19 mm
SprinklerscountPop-up sprinkler
ShrubscountShrub 200 mm pot
Fencing lengthlengthTimber paling fence 1.8 m

Worked example

Worked example: Larkspur Rise Residence

Sheet A0.03, the site plan, levels and trees at 1:150: a sloping site with about 3.0 m of fall, a house, a pool house, a studio and garage, and a pool.

MeasuredSheetQuantity
Site areaA0.031,696.71 m²
Buildings: house, pool house, studio and garageA0.03322.89 m²
Driveway, exposed aggregateA0.0321.35 m²
PoolA0.0340.50 m²
Permeable surfaces left for landscapingA0.031,311.97 m²
Retaining wall, blockwork, up to 1.2 m highA0.0330.54 m, 36.64 m² at 1.2 m
Trees with tree protection zonesA0.033

The permeable surfaces figure matches the sheet's own site analysis table. How it splits between turf, beds and paving comes from the landscape plan.

The three trees have tree protection zones of 7.2 m, 4.8 m and 4.2 m radius drawn around them.

A fictional demo project, drawn to scale and measured in TrueScale™.

Start free trial 30 days, every feature, no card

Common landscaping takeoff mistakes

  • Measuring a sloping site as flat. Larkspur Rise falls about 3.0 m across the site. On steep ground the surface is bigger than the plan; set a slope on the area where it matters.
  • Working inside a tree protection zone. The zones on the plan limit digging, paving and stockpiles. Mark them before you price the work near them.
  • Retaining walls at one height. A wall that is up to 1.2 m high is lower at its ends. Split the run where the height changes.
  • Forgetting the volumes. Mulch, soil and gravel are bought by the cubic metre. Mulch volume uses the bed area and a 75 mm depth you can change.

Standards and the NCC

Trees on development sites are protected under AS 4970, which sets a tree protection zone of 12 times the trunk diameter, as drawn on this plan. Engineered retaining walls follow AS 4678, and council rules cover the rest.

Landscaping takeoff questions

How do I measure turf area from a landscape plan?

Pick Turf and click around each lawn area. TrueScale shows each area and the total, and Garden beds and Paving area keep the other surfaces apart.

Can I count trees and shrubs?

Yes. Trees, Shrubs and Sprinklers are count tools, each with its own symbol.

Can I work out mulch volume?

Yes. Mulch volume is a volume tool: trace the bed, keep the 75 mm depth or type your own, and TrueScale gives the cubic metres.

Setting the scale on a 1:150 site plan

Pay once. Own it

One licence has every feature, the Estimate panel and Excel links included. Pay once, own your licence, and take off on TrueScale for Mac too.

Mac: Apple silicon (M1 or newer), macOS 14 or later. Printing, OCR, email, spell check and Link for Excel aren't on Mac yet. What's different on Mac