Built for every trade
Framing takeoff software for wall frames, openings and decks
Framing takeoffs turn walls into lineal metres and openings into counts: wall frames, floor and roof framing, beams, lintels, posts, trusses, decks and balustrades. In TrueScale™ each wall is clicked once along its centre and each opening is a single click.
Start free trial 30 days, every feature, no card
Framing and carpentry quote / measured in TrueScale
What the video shows
Silent screen recording, no narration. Ground floor of Townhouse 1 of Kestrel Lane, a fictional demo project. Each internal wall is drawn on its centreline with an Internal walls length tool at a 2,700 mm wall height. 1. Laundry and WC: 3,655, 1,990, 1,200 and 1,090 mm. 2. Garage: 3,655 and 5,945 mm. 3. Coats cupboard: 940, 1,055 and 1,055 mm. 4. The Markups List adds them up: 9 walls, 20,585 mm, 55.58 m2 of wall.
What carpenters measure, and why
- Wall frames as lengths, each wall once, because frames are made and priced by the metre at a given height.
- Doors and windows as counts, because every opening needs a lintel, trimmers and jamb studs.
- Floor framing, roof framing and decking as areas, and beams, lintels and balustrades as lengths.
- Posts, trusses and extra studs as counts.
The Framing and carpentry tool set
12 tools, from Tool Shed > Trade sets... > Framing and carpentry:
| Tool | Measures | Starter spec |
|---|---|---|
| Wall frame length | length | 90 x 45 studs at 600 |
| Roof framing area | area | Trusses at 900 |
| Doors | count | Hinged door, frame and hardware |
| Windows | count | Window 1200 x 900 |
| Studs | count | Extra studs |
| Floor framing area | area | Floor joists at 450 |
| Beams length | length | Engineered timber beam |
| Lintels length | straight length | Timber lintel |
| Posts | count | Post 90 x 90 |
| Trusses | count | Roof truss |
| Decking area | area | Timber decking |
| Balustrade length | length | Balustrade 1 m high |
Worked example
Worked example: Kestrel Lane Townhouses
Kestrel's two dimension plans, A2.01 for the ground floor and A2.03 upstairs, both at 1:50, across the three townhouses. Frames are 2.7 m tall downstairs and 2.55 m upstairs.
| Measured | Sheet | Quantity |
|---|---|---|
| Wall frame length, ground floor | A2.01 | 191.85 m |
| Wall frame length, first floor | A2.03 | 244.50 m |
| Door openings to frame, hinged and sliding | A2.01 + A2.03 | 18 + 21 = 39 |
| Garage doors | A2.01 | 3 |
| Windows | A2.01 + A2.03 | 18 + 33 = 51 |
Per townhouse: 145.45 m of wall frame, 63.95 m downstairs and 81.50 m upstairs, with 13 doors, a garage door and 17 windows.
Each wall was measured once, along its centre line, so a wall between two rooms counts once, not twice.
A fictional demo project, drawn to scale and measured in TrueScale.
Start free trial 30 days, every feature, no card
Common framing and carpentry takeoff mistakes
- Measuring room by room. Going around each room counts every internal wall twice. Measure each wall once.
- One height for every level. Kestrel frames stand 2.7 m downstairs but 2.55 m upstairs. Frames are built to height, so each level gets its own total.
- Forgetting plates and noggings. A metre of wall frame has a top and bottom plate and a row of noggings. Work them out from the wall length in your rate or in Excel.
- Openings without lintels. Every door and window needs a lintel to suit its width. Count them with the openings, or measure them with Lintels length.
Standards and the NCC
Timber framing is built to AS 1684, Residential timber-framed construction, under the NCC's housing provisions. Trusses and engineered beams come from the supplier's or engineer's design, and steel frames from the frame maker's design.
Framing and carpentry takeoff questions
How do I measure wall frames from a floor plan?
Pick Wall frame length and click along each wall once. TrueScale adds up the metres on the sheet, and each level's plan is its own sheet, so ground and first floor frames stay apart.
Can I count doors and windows at the same time?
Yes. Click each opening with Doors or Windows, and the opening counts sit next to the frame metres in the Markups List.
Does the set cover decks and balustrades?
Yes. Decking area is an area tool and Balustrade length a length tool, with Posts as a count.
Pay once. Own it
One licence has every feature, the Estimate panel and Excel links included. Pay once, own your licence, and take off on TrueScale for Mac too.
Mac: Apple silicon (M1 or newer), macOS 14 or later. Printing, OCR, email, spell check and Link for Excel aren't on Mac yet. What's different on Mac