Built for every trade

Plasterboard takeoff software for walls and ceilings

Plasterers price plasterboard (drywall in the US) linings by the square metre and trims by the metre: walls, ceilings, wet area and fire-rated board, suspended ceilings, cornice, bulkheads, shadow lines and access panels. TrueScale™ gives wall lining areas from wall runs and a height, and ceiling areas room by room.

Start free trial 30 days, every feature, no card

Plasterboard and ceilings quote / measured in TrueScale

Internal walls measured on their centrelines
What the video shows

Silent screen recording, no narration. Ground floor of Townhouse 1 of Kestrel Lane, a fictional demo project. Each internal wall is drawn on its centreline with an Internal walls length tool at a 2,700 mm wall height. 1. Laundry and WC: 3,655, 1,990, 1,200 and 1,090 mm. 2. Garage: 3,655 and 5,945 mm. 3. Coats cupboard: 940, 1,055 and 1,055 mm. 4. The Markups List adds them up: 9 walls, 20,585 mm, 55.58 m2 of wall.

What plasterers measure, and why

  • Wall linings as wall runs with a height, around each room, because both faces of an internal wall are lined.
  • Ceiling linings as areas, room by room, so wet areas and plain ceilings stay apart.
  • Wet area and fire-rated board on their own tools, because they are different sheets at different prices.
  • Cornice, bulkheads and shadow lines as lengths, and access panels as counts.

The Plasterboard and ceilings tool set

10 tools, from Tool Shed > Trade sets... > Plasterboard and ceilings:

ToolMeasuresStarter spec
Wall liningarea10 mm plasterboard
Ceiling liningarea13 mm plasterboard
Cornice lengthlength90 mm cove cornice
Wall lining lengthwall area (run x height)10 mm plasterboard
Wet area liningareaWet area board
Fire-rated liningareaFire-rated board 16 mm
Suspended ceiling areaareaSuspended grid ceiling
Bulkhead lengthlengthBulkhead 300 x 300
Access panelscountAccess panel 450 x 450
Shadow line lengthlengthShadow line trim

Worked example

Worked example: Kestrel Lane Townhouses

Sheets A2.01 and A2.03, the ground and first floor dimension plans at 1:50, for three townhouses. Garages and stairs are left out; wet areas here are bathrooms, ensuites, WCs and laundries.

MeasuredSheetQuantity
Ceiling lining, dry roomsA2.01 + A2.03201.51 + 267.39 = 468.90 m²
Ceiling lining, wet areasA2.01 + A2.0319.44 + 42.12 = 61.56 m²
Wall lining, dry roomsA2.01 + A2.03380.30 + 696.53 = 1,076.83 m²
Wall lining, wet areasA2.01 + A2.03111.78 + 165.24 = 277.02 m²

The wall linings were measured around every room on solid walls only, at 2.7 m downstairs and 2.55 m upstairs, so the open side between living and dining adds nothing. These are gross areas, before openings.

A fictional demo project, drawn to scale and measured in TrueScale.

Start free trial 30 days, every feature, no card

Common plasterboard and ceilings takeoff mistakes

  • Lining one face of internal walls. Both sides are lined. Measuring around each room picks up both faces.
  • The wrong ceiling height. Linings follow each level's ceiling height: 2.7 m and 2.55 m on this job.
  • Wet area board in the dry total. Keep bathrooms, ensuites, WCs and laundries on the wet area tools so the board and the price are right.

Standards and the NCC

Plasterboard linings are installed to AS/NZS 2589, wet areas are waterproofed to AS 3740 under the NCC, and fire-rated walls and ceilings follow the board maker's tested system.

Plasterboard and ceilings takeoff questions

How do I measure plasterboard for walls from a floor plan?

Draw Wall lining length around each room and type the ceiling height. TrueScale shows the length and the wall area for each run.

Can I keep wet area and fire-rated board apart?

Yes. Wet area lining and Fire-rated lining are their own area tools, next to Wall lining and Ceiling lining.

Can I measure suspended ceilings and bulkheads?

Yes. Suspended ceiling area is an area tool and Bulkhead length a length tool, with Shadow line length and Access panels in the same set.

Lining areas from wall runs and heights, step by step

Pay once. Own it

One licence has every feature, the Estimate panel and Excel links included. Pay once, own your licence, and take off on TrueScale for Mac too.

Mac: Apple silicon (M1 or newer), macOS 14 or later. Printing, OCR, email, spell check and Link for Excel aren't on Mac yet. What's different on Mac