Built for every trade
Brick and block takeoff software for bricklayers
Bricklayers and blocklayers price walls by the square metre and openings by the metre: face brick, blockwork, lintels, sills, piers, control joints and retaining walls. TrueScale™ turns each wall line into a wall area from its height, with brick and block kept apart.
Start free trial 30 days, every feature, no card
What bricklayers and blocklayers measure, and why
- Brick and block walls as areas, because bricks and blocks are worked out per square metre of wall.
- Wall runs with a height, for when the plan shows the wall as a line and the elevation gives its height.
- Lintels and sills as lengths over and under each opening.
- Piers one by one and control joints in metres, since both are labour items a bricklayer prices on their own.
The Masonry tool set
9 tools, from Tool Shed > Trade sets... > Masonry:
| Tool | Measures | Starter spec |
|---|---|---|
| Brick wall | area | Face brick, single skin |
| Block wall | area | 200 block, core filled |
| Lintel length | straight length | Steel lintel |
| Brick wall length | wall area (run x height) | Face brick, single skin |
| Block wall length | wall area (run x height) | 200 block, core filled |
| Piers | count | Brick pier 350 x 350 |
| Sills length | length | Brick sill |
| Control joints length | length | Control joint |
| Retaining wall area | area | Block retaining wall |
Worked example
Worked example: Kestrel Lane Townhouses
Kestrel Lane's ground floor plan, A2.01 at 1:50. The elevations show face brick to the ground floor and fibre cement cladding above, so the brick runs are the ground floor external walls.
| Measured | Sheet | Quantity |
|---|---|---|
| Brick wall length, ground floor external walls | A2.01 | 129.60 m |
| Openings in those walls | A2.01 | 27 |
| Lintel length, the opening widths | A2.01 | 49.32 m |
Per townhouse: 43.20 m of brick wall and 9 openings.
The general notes ask for masonry to AS 3700 with articulation joints at 6 m maximum centres in the brick veneer.
A fictional demo project, drawn to scale and measured in TrueScale.
Start free trial 30 days, every feature, no card
Common masonry takeoff mistakes
- Pricing the gross area. Take the windows and doors off the wall area. The window and door schedules give their sizes.
- Lintel length equals opening width. A lintel bears on the brickwork at each end. Add the bearing to every opening.
- Mixing brick and block. Brick and block use different labour, mortar and units, so each belongs on its own tool and its own line in the quote.
- Forgetting the joints. At 6 m maximum centres, a long veneer wall needs several articulation joints. Measure them with Control joints length.
Standards and the NCC
Masonry is built to AS 3700, or AS 4773 for masonry in small buildings, under the NCC. The Kestrel Lane notes call up AS 3700 directly.
Masonry takeoff questions
How do I get brick wall area from a floor plan?
Run Brick wall length along the wall line and enter the brickwork height. The Markups List gives the metres of wall and the square metres of face, and a new height updates the face area.
Can I measure walls on the elevations instead?
Yes. An elevation is just another sheet with a scale. Trace the wall face with Brick wall or Block wall and TrueScale gives the area directly.
Can I keep face brick and blockwork apart?
Yes. Brick wall, Block wall and their run versions are separate tools, and Retaining wall area keeps retaining walls apart too.
Pay once. Own it
One licence has every feature, the Estimate panel and Excel links included. Pay once, own your licence, and take off on TrueScale for Mac too.
Mac: Apple silicon (M1 or newer), macOS 14 or later. Printing, OCR, email, spell check and Link for Excel aren't on Mac yet. What's different on Mac