Built for every trade

Painting takeoff software for walls, ceilings and trim

Painters price by the square metre of wall and ceiling, by the metre of trim and cornice, and by the item for doors and windows. In TrueScale™, ceilings are traced room by room, walls come from a line and a height, and each door and window is one click.

Start free trial 30 days, every feature, no card

Painting and finishes quote / measured in TrueScale

External walls measured with the Perimeter tool
What the video shows

Silent screen recording, no narration. Ground floor of Townhouse 1 of Kestrel Lane, a fictional demo project, at 1:50. 1. The Perimeter tool follows the inside faces of the external walls corner by corner and closes on the first corner: 43,200 mm. 2. The perimeter is selected and its label is moved into the open living and dining floor.

What painters measure, and why

  • Ceilings as areas, room by room, because ceilings take a different paint and a different rate.
  • Walls from a line along the wall and its height. A plan draws walls as lines, while paint is priced by coverage per square metre.
  • Trim and cornice as lengths, and feature walls and render as their own areas.
  • Doors and windows one click each, since a painter prices them by the item: both faces, the frame and the reveals.

The Painting and finishes tool set

10 tools, from Tool Shed > Trade sets... > Painting and finishes:

ToolMeasuresStarter spec
Wall paintareaTwo coats acrylic
Ceiling paintareaTwo coats flat
Trim lengthlengthEnamel trim
Wall paint lengthwall area (run x height)Two coats acrylic
DoorscountDoor, both sides and frame
WindowscountWindow frame and reveals
External wall paintwall area (run x height)External acrylic, two coats
Feature wallareaFeature colour, two coats
Render areaareaAcrylic render
Cornice lengthlengthCornice, two coats

Worked example

Worked example: Kestrel Lane Townhouses

Ceilings and walls from the Kestrel dimension plans (A2.01 ground, A2.03 first, 1:50); skirting from the layout plans A2.02 and A2.04. Garages and stairs are left out of all three townhouses.

MeasuredSheetQuantity
CeilingsA2.01 + A2.03220.95 + 309.51 = 530.46 m²
Walls, every room on solid walls, at each level's heightA2.01 + A2.031,353.85 m²
Skirting to paint: living areas, bedrooms, hallsA2.02 + A2.04107.85 + 236.55 = 344.40 m
Doors to paint, both faces and the frameA2.01 + A2.0339
WindowsA2.01 + A2.0351

Per townhouse: 176.82 m² of ceiling and 451.28 m² of wall, before openings, with 13 doors and 17 windows. The wall area is the same set of runs a plasterer would line, at 2.7 m and 2.55 m.

A fictional demo project, drawn to scale and measured in TrueScale.

Start free trial 30 days, every feature, no card

Common painting and finishes takeoff mistakes

  • Guessing walls from the floor area. Rules of thumb miss tall walls, open plans and stairwells. Measure the walls.
  • One rate for everything. Wet area ceilings, feature walls and enamel trim each take their own paint and time. Give each a tool.
  • Leaving out doors and windows. Both faces, the frame and the reveals take time. Count them, do not fold them into the wall rate.
  • Old paint. On older buildings, test before you sand. Lead paint has its own method and its own price.

Standards and the NCC

AS/NZS 2311 is the guide to painting buildings, and AS 4361.2 covers managing lead paint in homes and other buildings.

Painting and finishes takeoff questions

How do I measure wall area for painting from a floor plan?

Run Wall paint length inside, or External wall paint outside, along the walls and enter the paint height. The Markups List gives the metres of wall and the square metres to paint, and a new height redoes the area.

Can I price ceilings and walls at different rates?

Yes. Ceiling paint, Wall paint, Feature wall and Render area are four different tools, so a ceiling coat, a wall coat and a feature colour never share a rate.

Can I count doors and windows for painting?

Yes. The painting set counts Doors and Windows as items and measures Trim length and Cornice length in metres.

Paintable wall area from runs and heights, step by step

Pay once. Own it

One licence has every feature, the Estimate panel and Excel links included. Pay once, own your licence, and take off on TrueScale for Mac too.

Mac: Apple silicon (M1 or newer), macOS 14 or later. Printing, OCR, email, spell check and Link for Excel aren't on Mac yet. What's different on Mac